Reversible Tee

Width of the neckline.

Measured across the shoulders, from seam to seam.

Measure straight across the garment at the underarm. Lay flat and measure edge to edge; do not double the width.

Measure straight across the garment, 40 cm below the high shoulder point. Lay flat and measure edge to edge; do not double the width.

Measure straight across the bottom hem. Lay flat and measure edge to edge; do not double the width.

From the high shoulder point to the front hem.

From the centre-back neck to the back hem.

Depth of the front neckline.

Depth of the back neckline.

Depth of the armhole.

Measured all the way around the sleeve, 5 cm below the underarm.

Measure straight across the sleeve opening. Lay flat and measure edge to edge; do not double the width.

Measured from the shoulder seam to the sleeve edge.

Width of the neckband.

The approved production specification is 0 cm; no back neck tape is included.

Width of the hem turnback.

Position of the forward shoulder seam measured from the high shoulder point.

Position of the lurex pip measured from the wearer’s right-hand side seam.

Use a flexible measuring tape. Lay the garment flat without stretching it. Values are finished garment measurements in centimetres. Circumference measurements go all the way around the garment.